Sanyo VCC-HD5600P Series Manual page 22

Setting Item
ALARM OUT1/ 2 (Alarm
output terminal number)
POLARITY (Signal polarity)
ALARM OUT TIME (Alarm
output time)
ALARM IN (Output
condition)
MOTION (Output condition)
Use the Remote Alarm buttons (
alarm output terminals.
Setting Item
ALARM OUT1/ 2 (Alarm output
terminal number)
POLARITY (Signal polarity)
ALARM OUT TIME (Alarm output
time)
Default Setting
OFF (Disables alarm output.)
NO
5SEC (Ex.: Beeps a warning for 5 sec.)
ALARM IN1 (Triggers alarm output when
ALARM IN1 terminal receives an alarm
signal.)
OFF (Disables alarm output using motion
sensor.)
) provided on the live screen to send alarm signals from the camera's
Default Setting
OFF (Disables alarm
output.)
NO
5SEC (Ex.: Beeps a warning
for 5 sec.)
Optional Setting
ON (Enables automatic alarm output.)
NC
2SEC to 5MIN
ALARM IN2 (Triggers alarm output when
ALARM IN2 terminal receives an alarm
signal.)
ON (Triggers alarm output using motion
sensor.)
Optional Setting
REMOTE (Enables remote alarm output.)
NC
2SEC to 5MIN, CC (Stops alarm output when Remote
Alarm button is clicked.)
Quick Operation Guide 8/14