Sanyo VCC-HD5600P Series Manual page 62

JPEG (16:9): 1920×1080, 1280×720, 1024×576, 640×360
JPEG (4:3): 1600×1200, 1280×960, 1024×768, 800×600, 640×480, 320×240
H.264 (16:9): 1920×1080, 1280×720, 640×360, 320×180
1600×1200, 1280×960, 1024×768, 640×480, 320×240
H.264 (4:3):
5 Configuring image clipping (CROPPING)
Selecting "ON" causes the VGA-size image at the center of the screen to be clipped and displayed on the live
screen on the PC monitor.
You cannot select "ON" if you selected "H.264" in [CODEC].
Selecting "ON" in [CROPPING] fixes the [RESOLUTION] value to a VGA-equivalent size ("640x360"
in 16:9 aspect ratio or "640x480" in 4:3 aspect ratio).
If you selected "H.264" in [CODEC], in [GOP], enter a GOP value.
6
This enables you to specify the GOP setting for the H.264 video stream.
In [FRAME RATE], select the frame rate of the stream.
7
The available options vary depending on your selection in [CODEC] and your camera model.
JPEG: VCC-HD5600: 0.1ips, 0.2ips, 0.5ips, 1ips, 3ips, 5ips, 10ips, 15ips, 30ips
VCC-HD5600P: 0.1ips, 0.2ips, 0.5ips, 1ips, 2.5ips, 5ips, 8ips, 12.5ips, 25ips
H.264: VCC-HD5600: 5ips, 10ips, 15ips, 30ips
VCC-HD5600P: 5ips, 8ips, 12.5ips, 25ips
8 In [PRIORITY], select whether you put priority on the video/image quality or the bit rate.
QUALITY, BIT RATE
If you selected "QUALITY", in [PICTURE QUALITY], specify the video/image quality.
Then, the system shows an appropriate bit rate depending on the selected quality.
BASIC, NORMAL, ENHANCED, FINE, SUPER FINE
If you selected "BIT RATE", in [BIT RATE], the system shows an appropriate bit rate for you.
Type the bit rate directly, if you want to change it.
The setting range is limited depending on the resolution and/or frame rate settings.
3
Click in the stream list.
SET
The camera restarts, and the registered settings are applied.
You may also choose to change the factory-default stream settings (STREAM1 and STREAM2).
Working with Administrator Configuration Screens 16/77