Sanyo VCC-HD5600P Series Manual page 83

Returns the camera to the auto focus mode when the zoom operation is performed after manual focusing.
1
In [FOCUS], select "MANUAL".
2
In [LIMIT NEAR], select the nearest focusing distance to the object.
10cm, 30cm, 50cm, 1m, 3m, 5m
When the distance to the object is less than or equal to 1m, focusing may become difficult.
3
In [SPEED], specify the speed at which the focus is set, and then click
Available settings: 1, 2, 3, and 4 (fastest)
Configure the optical zoom speed, electronic zoom magnification, and other zoom settings.
The configured settings are applied in common to all the camera views.
1
In [SPEED], select the optical zoom speed.
Available settings: 1, 2, 3, and 4 (fastest)
2
In [EL ZOOM], select the electronic zoom magnification power.
The optical zoom provides a maximum magnification power of ×10.
If you need a zoom magnification of more than ×10, use the electronic zoom.
OFF: Disables the electronic zoom (use optical zoom only).
2x (approx. 20 times), 4x (approx. 40 times), 8x (approx. 80 times), 16x (approx. 160 times)
The electronic zoom, if activated, will degrade the quality of image slightly.
Working with Administrator Configuration Screens 37/77
SET .