Sanyo VCC-HD5600P Series Manual page 18

If you are operating the camera for the first time, check the factory default video and audio conditions on the
VIDEO & AUDIO SETTINGS screen. Change the default settings as desired.
For details, refer to the "VIDEO & AUDIO SETTINGS" section.
16:9 (Default) → 4:3
By default, the list shows the two stream patterns, STREAM1 and STREAM2. Use the buttons provided below the
list to add, change, or delete stream patterns.
The factory default settings for STREAM1 and STREAM2 are as shown in the screenshots below.
ADD : Use this button to add up to two custom stream patterns (STREAM3 and STREAM4).
CHANGE : Use this button to change stream settings (STREAM1 to STREAM4).
DELETE
: Use this button to delete registered stream patterns.
Digital PTZ Function
The digital PTZ function lets you clip specific areas of the subject in VGA size and perform zoom, pan, and tilt
operations just as when using a PTZ camera.
To use the digital PTZ function, set [DIGITAL PTZ] to "ON" on the JPEG stream registration screen shown above
(STREAM2 screen in this example) and click
DIGITAL PTZ
on the live screen.
Quick Operation Guide 4/14