Sanyo VCC-HD5600P Series Manual page 100

1 Setting detection lines
Select the radio button next to [LINE] and drag the mouse to draw detection lines.
You can draw up to eight detection lines.
Each detection line has a serial number (1 to 8) and area designations (A and B).
Setting detection areas
2
Select the radio button next to [AREA] and drag the mouse to draw detection areas.
You can draw up to four detection areas.
Each detection area has a serial number (1 to 4) and area designations (A and B).
Configuring detection conditions
3
Select the [LINE] or [AREA] radio button to select a line or area number, and specify detection conditions.
To delete a detection line or area, click the [LINE] or [AREA] radio button to select a line or area
number, and click
<Example: Configuring detection conditions for LINE 1>
Select the [LINE] radio button and, in the pull-down menu, select the line number "1".
1
2 In [SIZE], select the size of the object you want to detect.
Specify the size of the object you want to detect.
The higher the value, the larger the detectable object size.
The detection line (or detection area) is now shown with an image that represents the detection size. Any object
larger than this image will be detected.
0 to 5
DELETE
.
Working with Administrator Configuration Screens 54/77