Sanyo VCC-HD5600P Series Manual page 67

1 SET
: Click this button when finished configuring the camera settings you accessed by clicking each
sub menu item.
2 CANCEL
: Click this button before clicking
3 DEFAULT
: Click this button to reset the settings on the camera configuration screen to the defaults (factory
settings).
4
HELP: Click this to display a menu from which you can display the explanation of each configuration
screen on the HELP screen.
Configuration Summary for Each Sub Menu Item
Sub Menu
VIEW You can have eight patterns of view settings (CAM1 - CAM8) by configuring the
1
monitoring conditions through sub menu items "2 IRIS" to "16 PRIVACY MASK".
2
IRIS Configure the lens iris.
WHITE Adjust the white balance.
3
BALANCE
4
BLC Configure the backlight compensation function.
5
SHUTTER Configure the electronic shutter.
6
AGC Configure the gain of the video signal.
DAY/NIGHT Configure whether to use a fixed mode (color or black-and-white) or to automatically
7
switch from the color mode (daytime) to black-and-white mode (nighttime) in order to
increase sensitivity for darker images in night time.
8
APERTURE Corrects the profile of the target object.
VIVID COLOR Increases the saturation of images.
9
EFFECT
10 GAMMA
Adjusts the contrast and brightness level.
11 DNR
Reduces automatically the image noise in low illuminance conditions.
12 FOCUS
Configure the lens focus settings.
13 ZOOM
Configure the optical zoom speed, electronic zoom, and other zoom settings.
14 MIRROR
Inverts images vertically and horizontally.
15 MOTION
Configure to turn ON or OFF the motion sensor function.
PRIVACY Configure the privacy mask settings to mask portions of the subject you want to hide for
16
MASK privacy protection.
"Application" in the above table means the following:
VIEW: Applies the configured settings to the camera views that were specified in [VIEW] only.
Common: Applies the configured settings in common to all the camera views.
You can view how your changes affect the video image in real time.
You can configure eight patterns of monitoring conditions (camera views).
For example, select "CAM1" to configure the normal live monitoring conditions for daytime use and select "CAM2"
to configure the monitoring conditions with the Day/Night function for nighttime use, respectively. Thus, you can
switch the monitoring conditions depending on your needs.
SET
to restore the previous settings.
Operation
Working with Administrator Configuration Screens 21/77
Application
VIEW
VIEW
VIEW
VIEW
VIEW
VIEW
VIEW
VIEW
VIEW
VIEW
VIEW
Common
Common
Common
VIEW
Common