Video Input; Input Source Selection (Video, S-Video) - Sanyo PLC-XU101 Owner's Manual

Video Input

Input Source Selection (Video, S-Video)

Direct Operation
Choose Video by pressing the VIDEO button on the top
control or the remote control.
Before using these buttons, correct input source should be
selected through menu operation as described below.
Menu Operation
1 Press the MENU button to display the On-Screen
Menu. Press the Point
frame pointer to the Input Menu icon.
2 Press the Point
pointer to Video and then press the SELECT button to
display the Source Select Menu .
3 Move the pointer to the desired source and then press
the SELECT button.
When selecting Auto, the projector automatically
Auto
detects incoming video signal, and adjusts itself
to optimize its performance. The projector
selects connection in the following order:
1. S-Video
2. Video
When video input signal is connected to the
Video
VIDEO jack, select Video.
When video input signal is connected to the S-
S-Video
VIDEO jack, select S-Video.
✔
Note:
•When the Input Search function is set to "On1" or "On2", the
input signal will be searched automatically (p.45).
buttons to move the red
7 8
ed buttons to move the red arrow
Top Control
VIDEO button
REMOTE CONTROL
VIDEO button
Input Menu icon
Input Menu
Move the pointer to
Video and press the
SELECT button.
VIDEO
Source Select Menu (VIDEO)
Move the pointer to the
source that you want to
select and press the
SELECT button.
35