Table of Contents
Advertisement
Video Input
Input Source Selection (Video, S-video)
Direct Operation
Choose Video by pressing the INPUT button on the top
control or the VIDEO button on the remote control.
Before using these buttons, correct input source should be
selected through menu operation as described below.
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point
frame pointer to the Input Menu icon.
2
Use the Point
ed
pointer to Video and then press the SELECT button to
display the Source Select Menu.
3
Move the pointer to the desired source and then press
the SELECT button.
When selecting Auto, the projector automatically
Auto
detects incoming video signal, and adjusts itself
to optimize its performance. The projector selects
connection in the following order:
1. S-video
2. Video
When video input signal is connected to the
Video
VIDEO jack, select Video.
When video input signal is connected to the S-
S-video
VIDEO jack, select S-video.
✔Notes:
• Wired and Wireless are for the Network function. See
the owner's manual "Network Set-up and Operation" .
• When the Input Search function is set to "On1" or "On2",
the input signal will be searched automatically (p.51).
40
buttons to move the red
7 8
buttons to move the red arrow
Top Control
INPUT button
Computer 1 (Analog)
Computer 1 (Digital)
Remote Control
VIDEO button
Input Menu icon
Input Menu
VIDEO
Source Select Menu (VIDEO)
Move the pointer to the source
that you want to select and
press the SELECT button.
INPUT button
Computer 2
Video
Wired
Wireless
Move the pointer to
Video and press the
SELECT button.
Advertisement
Table of Contents
