Recording - Sanyo ICR-XPS01M Instruction Manual

Recording

This section describes how to use the built-in microphone for recording.
If the "SCENE SELECT" setting is set to "MUSIC" or the "MIC ALC" setting is "OFF", you can
manually adjust the recording level according to the content of recording or the sound level.
Turn on the power.
1
Turning on the power (page 36)
Select a folder for recordings.
2
Switching operation mode/folder (page 31)
Select a recording scene.
3
Selecting a recording scene (page 56)
• If the "SCENE SELECT" setting is set to "MUSIC"
or the "MIC ALC" setting is "OFF", proceed to
step to adjust the recording level.
4
(If a number appears on the bottom right side of
the screen, this indicates ALC is off.)
• If the "SCENE SELECT" setting is not set to
"MUSIC" or the "MIC ALC" setting is "ON", you
don't need to adjust the recording level. Instead,
skip to step
58
.
5
ALC OFF ALC OFF
Recording Recording
level level
displayed displayed
ALC ON ALC ON
Recording Recording
level not level not
displayed displayed