Sanyo ICR-XPS01M Instruction Manual page 143

• The selected sound equalizer mode
appears on the screen.
Sound EQ mode
Setting your favorite sound EQ
mode (only when USER is selected)
When you select USER as the sound EQ
mode, you can customize this mode by
changing each of the five bands of the
sound EQ mode.
Change the "SOUND EQ" mode
1
to "USER".
Tap –.
2
The 150Hz frequency band is
highlighted and selected.
Tap /
3
frequency band you want to
change.
The selected frequency band is
highlighted.
to select a
• The following frequency bands are
available: 150Hz, 500Hz, 1kHz,
4kHz, and 12kHz.
Tap +/– to change the level of
4
the selected frequency band.
You can change the level from -6dB
to 6dB (13 increments), with each
increment being 1dB. The larger the
dB number, the stronger it becomes.
• Tapping + increases the level.
• Tapping - decreases the level.
• To modify another frequency
band, repeat steps
• While making changes, if you
want to cancel the operation,
press the STOP button ( ). The
screen in step
Tap .
5
Tap MENU to exit the menu.
and .
3 4
returns.
1
143