Using Your Pc To Charge The Battery; Connecting To Your Pc - Sanyo ICR-XPS01M Instruction Manual

Using your PC to charge the battery

You can connect the unit to your PC to charge the lithium-ion battery (supplied).

Connecting to your PC

Connect the unit to your PC.
Connecting your PC (page 157)
Make sure the screen indicates the unit is connected to
your PC.
The LED light comes on and charging starts.
• While the battery is being charged, the battery
indicator on the screen changes as shown in the
illustration.
• During the operation, if you want to stop charging,
disconnect the unit from your PC.
Disconnecting your PC (page 158)
• When charging is finished, the LED light goes off.
• Charging takes about 150 minutes.
* The charging time is an approximate figure based
on a completely discharged battery. It will vary,
depending on the remaining battery power, ambient
temperature, etc.
CHARGING CHARGING
Charging display Charging display
159