Performing A-B Repeat Playback (Segment Repeat Playback) - Sanyo ICR-XPS01M Instruction Manual

Performing A-B repeat playback (segment repeat playback)

During playback, you can specify a segment of the file (point A to point B) and then play that
segment continuously.
Play the file you want to perform A-B
1
repeat playback.
Playing a file (page 71)
Tap LIST at the position you want to start
2
the segment for A-B repeat.
The start position indicator lights.
Tap LIST at the position you want to end
3
the segment for A-B repeat.
This segment will play continuously until you
release A-B repeat playback.
• During A-B repeat playback, performing any of the following operations releases A-B
repeat playback.
- Tapping LIST again
- Pressing the STOP button ( )
- Tapping
• Even during A-B repeat playback, you can change the playback speed (
index marks (
• You cannot set up A-B repeat playback if point A and point B are too close.
• After setting up point A, if you do not set up point B, the end of the file will become point B.
• Point A and point B must both be set within the same file.
78
/
page 82), or perform phrase playback (
Start position indicator Start position indicator
A-B repeat indicator A-B repeat indicator
page 76), set
page 77).