Sanyo ICR-XPS01M Instruction Manual page 59

Adjust the recording level (only if the
4
"SCENE SELECT" setting is set to
"MUSIC" or the "MIC ALC" setting is
"OFF").
Use the following procedure to adjust the recording
level.
Press the REC button ( ).
The recording standby screen appears.
• In this state, recording has not started.
• You can use the stereo earphones to monitor
the recording sound. Use (+/–) to adjust the
sound volume.
When recording musical instruments,
etc., produce sound in the direction of
the microphone.
The level meter extends to the right as the
recording level increases. The further it extends
to the right, the louder sound the microphone
collects.
Tap /
level.
• You can adjust the displayed recording level
from 0 to 30. The recording level can be
set for each microphone sensitivity. If the
recording level is set to 0, no sound will be
recorded.
Recording
1
level
MIC SENS.
(to be continued on next page)
to adjust the recording
30 1
LOW HIGH
30
Level meter Level meter
59