Sanyo ICR-XPS01M Instruction Manual page 160

When charging is finished, disconnect the unit from your PC.
Disconnecting your PC (page 158)
• You can also use the multi-cradle to charge the unit (ICR-XPS01MF only).
Using the multi-cradle to charge the unit (page 47)
• If the screen does not display a PC connection, disconnect the unit from your PC and
then connect again.
Connecting your PC (page 157)
• Charging may not occur in the following cases.
- Your PC is in the suspend mode.
- You restart your PC.
• If the charging indication displays
following reasons.
- There is no battery in the unit.
- The temperature of the unit has risen.
(Disconnect the unit from your PC. Turn off the power of the unit, leave it for a while, and
then connect it back to your PC.)
• During charging, the battery may become warm. This is not a malfunction.
• If the battery duration becomes significantly shorter even after a full charge, this indicates
the battery life has come to an end. Purchase a new lithium-ion battery (original battery).
• During charging, always be sure the battery compartment lid is closed.
• You can charge the battery while transferring data. However, depending on the usage
condition, the battery duration after a charge may become shorter.
• Charge the battery at an ambient temperature of 5 to 35˚C (41 to 95˚F).
160
, this means charging is not possible due to the