Setting Recording Eq; About The Preset Recording Eq - Sanyo ICR-XPS01M Instruction Manual

Setting recording EQ

With the recording EQ function, you can record using your desired sound quality, such as by
emphasizing the bass range or middle range.
• Recording EQ can be set for microphone recording (using folders A to D).
• Recording EQ can only be set in the recording standby state. (The "SCENE SELECT"
setting is set to "MUSIC" or "MIC ALC" setting is set to "OFF".)
Recording (page 58)

About the preset recording EQ

The unit comes with seven preset recording EQ modes: FLAT, SUPER BASS, BASS,
MIDDLE, BASS &TREBLE, TREBLE, and SUPER TREBLE, plus a USER option that you
can use to set up 5-band recording.
The seven preset recording EQ modes have the following features.
FLAT SUPER BASS
Record with Record by
no particular emphasizing
sound range the bass
emphasized. range
strongly.
• When the unit is shipped, the USER setting is same as FLAT.
• The seven preset recording EQ modes cannot be modified.
If you want to fine tune your recording EQ mode, select USER and then customize it.
Setting your favorite recording EQ mode (only when USER is selected) (page 64)
62
BASS MIDDLE
Record by Record by
emphasizing emphasizing
the bass the middle
range slightly. range.
BASS&TREBLE TREBLE
Record by Record by
emphasizing emphasizing
the bass and the treble
treble ranges range slightly.
slightly.
SUPER TREBLE
Record by
emphasizing
the treble
range
strongly.