About Backlight Of Buttons/Touch Panel - Sanyo ICR-XPS01M Instruction Manual

About backlight of buttons/touch panel

If the "LED NAV" setting is "ON", a backlight of buttons/touch panel turns on in response
to the state of the unit such as recording, playback, or FM radio. Only the area that can be
operated on lights up. When the backlight of a button turns on, press to use it. Similarly,
when the backlight of an area on the touch panel turns on, gently tap the area to use it.
LED NAV (page 152)
(Example: Screen and buttons/touch panel during recording when MIC ALC is turned on)
During recording when
MIC ALC is turned on
If the "BACKLIGHT" setting is changed, the LCD display and the touch panel's backlight may
go off after the setting. While the touch panel's backlight is off, tapping the touch panel once
turns it back on so that you can operate the touch panel again.
If the "BACKLIGHT" setting is "OFF", both the screen and the touch panel dim after 30
seconds. If you want to check the unit, tap the touch panel once.
BACKLIGHT (page 151)
24
Buttons or areas on touch panel
that can be used light up
Backlight of buttons/
touch panel