Sanyo ICR-XPS01M Instruction Manual page 65

Tap –.
2
The 150Hz frequency band is highlighted and
selected.
Tap /
3
you want to change.
The selected frequency band is highlighted.
• The following frequency bands are available:
150Hz, 500Hz, 1kHz, 4kHz, and 12kHz.
Tap +/– to change the level of the selected
4
frequency band.
You can change the level from –12dB to 12dB (25
increments), with each increment being 1dB. The
larger the dB number, the stronger it becomes.
• Tapping + increases the level.
• Tapping – decreases the level.
• To modify another frequency band, repeat steps
and .
3 4
• While making changes, if you want to cancel
the operation, press the STOP button ( ). The
screen in step
to select a frequency band
returns.
1
65