Flow Meter Card Plug (Front View)
Flow Meter Plug Pin Assignments
Row 2, Pin 1: TB2, Pin 5 (Yellow)
Row 2, Pin 2: TB2, Pin 4 (Orange)
Row 2, Pin 5: TB2, Pin 2 (Gray)
Changing the Computer Card
1.
Turn OFF the main power
switch.
2.
Pull out the thumb screw on
top of the controller assembly
and carefully flip up the
assembly and board.
3.
Remove the connectors from
the computer card:
a.
I/O Board
b.
Pendant Interface
c.
Flow
Meter
Interface
d.
Printer Interface
4.
Loosen the two screws on the
small bracket.
5.
Slide the bracket away from
the computer card.
6.
Slide the computer card out
from
the
power
connector and other bracket.
7.
Install the Computer Card in
the
reverse
order
disassembly.
Power Inlet Connector
Pin Assignments
Pin 1: +5 Volts
Pin 2: Common
Pin 3: + 12 Volts
Pin 4: - 12 Volts
684-015
111-663 Computer Card
Card
inlet
of
Pendant Plug (Front View)
Pendant Plug Pin Assignments
Row 1, Pin 6: Pend. 3 (Purple)
Row 1, Pin 5: Pend. 2 (Blue)
Row 1, Pin 2: Pend. 6 (Orange)
Row 2, Pin 2: TB2, Pin 4 (White)
Back View of Power Inlet Connector
33