Table of Contents
Advertisement
Setup Screens (Continued)
Change Installation Title Screen
CHANGE INSTALLATION?
RECIPE 00
NO
YES
QUIT
Press YES
Precision Mix™ Identification Number
STATION NMBR IS XX
NEW VALUE? XX
NO
QUIT
Press NO
Recipe Input Select
RECIPE SELECTED
FROM PENDANT
CHANGE?
NO
YES
QUIT
Press NO
684-015
Pendant Screens
RPT
If you want to change the program in the installation
category, press the YES key.
change the program in the installation category, press
the NO key to return to the Setup Ratio Title screen (on
page 13). Press the QUIT key to return to the Main
Title screen. NOTE: RECIPE 00 only appears when
the recipe portion of the program is activated.
With this screen, you can set a specific ID number for
the Precision Mix™. The ID number you choose will
print out on the run report and the setup report. You will
need to use this feature when there are multiple
Precision Mix™ units connected to one printer. Station
#00 is the default. It cannot be used when multiple units
are connected to one printer. When station #1 to 8 are
used, a (@U10) message will appear on line one of the
printed reports; this is normal. To change the station
number, key in the new value and press ENTER. The
new number will display on line one.
These two screens only appear when the recipe portion
of the program is turned on. The recipe selected from
I/O screen is not available for usage on this unit.
Whatever is selected will globally change for all recipes.
If you do not want to
19
Advertisement
Table of Contents
