Table of Contents
Advertisement
The Precision Mix™ Controller has an internal clock
which allows the operator to display the year, month,
day, hour, and minute of each report and each alarm.
Once set, the clock will continue to run whether the
Precision Mix™ controller is on or off.
To set the clock:
1.
Press the blank key in the upper right corner of the
pendant once, to get to the Main Title screen.
GRACO
PRECISION MIX™
REV. 1.2
RUN
SETUP BAT
2.
Press the black key once again to get into the clock
setup mode.
PRECISION MIX™
REV. 1.2
RUN
SETUP BAT
YEAR=00
3.
Enter a 2 digit value (year) and the pendant will
automatically scroll to the next screen.
REV. 1.2
RUN
SETUP BAT
YEAR=93
MONTH=00
26
684-015
Setting the Clock
4.
Enter a 2 digit value (month) and the pendant will
automatically scroll to the next screen.
RUN
YEAR=93
MONTH=08
DATE=00
5.
Enter a 2 digit value (date) and the pendant will
automatically scroll to the next screen.
YEAR=93
MONTH=08
DATE=24
GTOT
HOUR (0-24)=00
6.
Enter a 2 digit value in military time and the
pendant will automatically scroll to the next screen.
MONTH=08
DATE=24
HOUR (0-24)=15
GTOT
MINUTE=00
7.
Enter a 2 digit value (minutes) and the pendant will
automatically scroll to the next screen.
MINUTE=36
8/24/93
GTOT
15:36
8.
Press ENTER and the screen will return to the Main
Title screen.
SETUP BAT
GTOT
ENTER
TO CONTINUE
Advertisement
Table of Contents
