Omega iServer 2 Series User Manual page 21

6.1.2.1 Advanced Smart Probe Configuration and Alternative Firmware Update with
SYNC
Omega Link Smart Probe firmware updates can also be completed through Omega's
SYNC configuration software. The firmware must still be downloaded from the iServer 2
web UI. Simply launch the software on a PC with an open USB port, and connect the
Smart Probe to the PC using an Omega Link Smart Interface, such as the IF-001 or IF-
006-NA.
Figure 27: SYNC auto-detects smart probes connected through an Omega Smart Interface like IF-001
SYNC will automatically detect the connected Smart Probe and will display the device
Inputs tab. Click the Device Settings tab and click the Firmware Update button.
Figure 28: SYNC Device Settings and Firmware Update button
The user will be given the option to save any previously logged device data, however,
users should note this option may take up to 10 minutes to complete.
19 | M 5 7 9 1