Omega iServer 2 Series User Manual page 38

Step 6: Click Internet Protocol Version 4
( TCP/IPv4) to highlight the selection
and then click Properties.
Step 7: Click Use the following IP
address and enter an IP address
that uses the same network part
(the first nine digits of the IP
address) but with a unique host
part (the last three digits of the IP
address) as the static IP Address
assigned to the iServer 2 in Step
1.
For example, if the Static IP
assigned to the iServer 2 is:
192.168.3.200, then the IP address
entered in the text box should be:
192.168.3.XXX (the XXX should be
any value that is NOT 200)
Step 8: Click OK to finalize
Figure 50: Unidentified Network Properties
Figure 51: TCP/IPv4 and subnet mask properties for micro-USB 2.0
connection
36 | M 5 7 9 1