Table of Contents
Advertisement
5.3
Method 3 – Direct to PC Setup – Micro USB 2.0 (
Important:
To begin, connect the iServer 2 directly to the PC using a micro-USB 2.0 cable.
Step 1: Navigate to the Windows Control Panel and click Network
and Sharing Center .
Step 2: Click the Unidentified Network Connection.
Step 3: Click Properties .
Administrator access to the PC may be required to change the PC Network
Properties. The default static IP for connections through USB is: 192.168.3.200 . If the
user is unable to access the iServer 2 webserver UI, the Bonjour Service may need
to be installed. The service can be downloaded from the following URL:
https://omegaupdates.azurewebsites.net/software/bonjour
Figure 16: Network and Sharing Center – Unidentified Network
Display and Non-Display Models
Figure 15: Windows Control Panel
Network and Sharing Center
Figure 17: Unidentified Network Status
)
14 |
M 5 7 9 1
Advertisement
Table of Contents
