Table of Contents
Advertisement
Figure 29: SYNC option to save logged device data prior to firmware update
Open the .hex file from the File Explorer containing the latest firmware for your Smart
Probe to begin the firmware update process.
Figure 30: Firmware update process
When the update is complete, the user will need to confirm on screen that the device will
be power cycled. SYNC will reopen the Inputs UI tab once the process is complete.
Figure 31: After the update, the user will need to powercycle and SYNC will open on the inputs tab
once complete
Smart Probe
For additional information regarding the configuration of your
, refer to the
user's documentation associated with your Smart Probe model number. SYNC
configuration software can be downloaded for free at:
https://www.omega.com/en-us/data-acquisition/software/sync-software/p/SYNC-by-
Omega
20 |
M 5 7 9 1
Advertisement
Table of Contents
