Configuring Sensing Devices After Pairing With Oeg - Omega iServer 2 Series User Manual

Step 9: Launch and log in to your OEG account.
Step 10: Click the
dropdown and click TC or Probe from the Product Model dropdown, depending on the
model of iServer 2 being connected.
Step 11: Input the static IP Address of the connected iServer 2.
Step 12: Click Add to finalize your configuration.
All sensing devices connected to the iServer 2 will appear on OEG after the pairing is successful.
The readings from offline units will display NaN. For more information on how to navigate OEG,
refer to the OEG Software User's Manual.

7.3 Configuring Sensing Devices after Pairing with OEG

If a sensing device paired to the iServer 2 has been configured or modified after the iServer 2 has
been added to OEG, the user must reboot the iServer 2 and restart the OEG software to sync with
the configuration made to the connected device.
icon or Add Devices . Then select iServer 2 from the Product Family
Figure 52: OEG Add Devices menu – iServer 2 Model
Figure 53: OEG Add Devices menu – Connection Parameters
37 | M 5 7 9 1