Water Filter - BRAVILOR BONAMAT SPRSO User Manual

7.1.6 Water filter

How to install a water filter is described in section "10.3 Installation of a water filter" on page 85.
If a water filter is installed, replaced or removed this must be confirmed in the software so that
the counter is updated. The Sprso can now indicate when it needs to be replaced.
A water filter reduces limescale and impurities in the water, making descaling less frequent (see
section "10.1 Water hardness and filter information" on page 84).
Additionally, it ensures a consistent quality of the hot beverage in both taste and aroma.
► When replacing an internal water filter with an external filter, or vice versa, the first filter must
first be uninstalled from the software (screen
can be installed.
7.1.6
7.1.6a
7.1.6b
"7.1.6g" on page 37), after which the other filter
You can replace, remove or install the water filter:
• press start to confirm or
• press < or > to scroll through the maintenance menu
► water filter already installed:
next screen is 7.1.6b
► water filter not yet installed:
next screen is 7.1.6k
Water filter information
• litres of water that passed the filter after the last
installation/replacement
• press > to go to the next screen
► xxx Indicates how much water the machine has used and
yyy is the amount when the water filter needs to be
changed (see section
Replace the same type of water filter:
► the water filter counter has been reached
• press < or > to choose no/yes
• press start to confirm
► selected YES:
next screen is 7.1.6c
► selected NO:
next screen is 7.1.6g
10.1 on page 84).
35