Standby - BRAVILOR BONAMAT SPRSO User Manual

4. Standby

The Sprso does not have a power button, but you can manually put the machine into standby
mode at any time.
In standby mode all functions are switched off only the start button keeps flashing slowly.
To activate the machine press the start button.
► See also section 7.3.4 on page 58
► The function 'flush prior to standby' (4b) has been removed for:
- machines from serial number 020002381679 onwards;
- software updates starting from 04-2023.
4a
4b
4c
to allow the Sprso to automatically enter the standby mode.
Start the 'standby mode':
• press and hold the 'start button'
• the necessary flushes will be done when enabled/
required
The "goodbye" screen remains active for a few seconds,
after which only a slowly blinking start button is visible.
► Touch the start button to activate the Sprso.
The screen blinks orange and
black.
• after a few seconds the
Sprso starts to flush
► Hot water (±15 ml) flushes
from the outlet into the drip
tray.
► The reminder 'clean milk
system daily' is only visible
if a milk unit is connected.
9