7.1.7 Reposition CIRCO brewer axis
It is possible that the CIRCO brewer housing cannot be brought into the correct position
because the CIRCO brewer axis has rotated.
► The CIRCO brewer axis shaft can be turned manually and must not be turned with tools.
7.1.7
7.1.7a
7.1.7b
40
You can reposition the CIRCO brewer axis:
• press start to confirm or
• press < or > to scroll through the maintenance menu
• open the side panel as
shown on the screen
► When the side panel is
removed, the next screen
will appear.
• press < or > to determine
the direction of rotation
• press start to confirm and
go to the next screen