7.2.2 Edit default beverage
You can change the settings of the default beverages.
The milk based beverages are always visible in this menu but cannot be edited, unless the milk
unit is activated in "7.3.1 Milk unit" on page 55.
Once a self-made beverage is created it appears here too (see 7.2.2f). The only difference with
a default beverage is that a self-made beverage cannot be switched off (disabled), it must be
deleted.
7.2.2
7.2.2a
7.2.2b
50
Edit a default beverage:
• press < or > to scroll through the beverage menu
• choose a beverage to adjust
• press start to confirm
Disable a default beverage:
• press < or > to choose no/yes
• press start to confirm
► selected YES:
back to screen
7.2.2
► selected NO:
go to the next screen
Set the strength and intense function:
• press < or > to choose the strength
• press
to switch the intense function on/off
• press start to confirm
► 2 Beans is basic strength.
(1 bean: -1 gr .,
3 beans: +1 gr.)
► The intensive function will extend the brew time by 10%.