Table of Contents
Advertisement
Figure 80. Riser 2e
1. Slot 2, x16, LP-HL
3. Signal cable connector
NOTE:
The expansion-card slots are not hot-swappable.
The following table provides guidelines for installing expansion cards to ensure proper cooling and mechanical fit. The expansion
cards with the highest priority should be installed first using the slot priority indicated. All the other expansion cards should be
installed in the card priority and slot priority order.
Table 92. Configuration 0: No Riser
Card type
Foxconn Front PERC 12/11
Intel (OCP: 100Gb)
Mellanox (OCP: 100Gb)
Broadcom (OCP: 25Gb)
Intel (OCP: 25Gb)
Mellanox (OCP: 25Gb)
Broadcom (OCP: 10Gb)
Broadcom (OCP: 1Gb)
Dell BOSS N1 Module
Table 93. Configuration 1: R1a+ R2a
Card type
Inventec Serial port module (LP)
Foxconn Front PERC 12/11
Intel (OCP: 100Gb)
Mellanox (OCP: 100Gb)
Broadcom (OCP: 25Gb)
Intel (OCP: 25Gb)
Mellanox (OCP: 25Gb)
Broadcom (OCP: 10Gb)
Broadcom (OCP: 1Gb)
Dell BOSS N1 Module
2. Power cable connector
4. Signal cable connector
Slot priority
Integrated slot
Integrated slot
Integrated slot
Integrated slot
Integrated slot
Integrated slot
Integrated slot
Integrated slot
Integrated slot
Slot priority
2
Integrated slot
Integrated slot
Integrated slot
Integrated slot
Integrated slot
Integrated slot
Integrated slot
Integrated slot
Integrated slot
Maximum number of cards
1
1
1
1
1
1
1
1
1
Maximum number of cards
1
1
1
1
1
1
1
1
1
1
Installing and removing system components
117
Advertisement
Table of Contents
