Table of Contents
Advertisement
Figure 57. Cable routing configuration 13 - 2.5-inch drive backplane with NVMe drives with fPERC11
Table 86. Connector descriptions for 2.5-inch drive backplane with NVMe drives with fPERC11
From
BP_PWR_1 (backplane power connector)
BP_DST_PA1 (backplane SATA connector, cable marking BP
PA1)
BP_DST_PA2 (backplane SATA connector, cable marking BP
PA2) and BP_DST_PB2 (backplane SATA connector, cable
marking BP PB2)
CTRL_DST_PA1 (fPERC connector on the backplane)
To
SIG_PWR_1 (system board power connector)
BP_DST_PB1 (backplane SATA connector, cable marking BP
PB1) and CTR_SRC_PA1 (fPERC connector on the backplane)
CTR_SRC_PB1 (fPERC connector on the backplane)
SL5_CPU1_PA3 (signal connector on the system board, cable
marking MB SL5)
Installing and removing system components
99
Advertisement
Table of Contents
