Installing The Ocp Card (Rear Ocp) - Dell PowerEdge R660xs Installation And Service Manual

Figure 111. Removing the OCP card
Next steps
Replace the OCP card.

Installing the OCP card (rear OCP)

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. Remove the expansion card
Steps
1. Open the blue latch on the system board.
2. Slide the OCP card into the slot in the system.
3. Push until the OCP card is connected to the connector on the system board.
4. Close the latch to lock the OCP card to the system.
144 Installing and removing system components
Safety instructions.
Before working inside your system
riser.
.