Target Group; Avoiding Dangers; Standard Scope - Siemens SIMOTICS S-1FK2 Operating Instructions Manual

1.2.2

Target group

Description
These operating instructions are intended for:
• Fitters
• Commissioning engineers
• Machine operators
• Service and maintenance personnel
• Warehouse personnel
• Personnel decommissioning the motor
• Personnel disposing of the motor
1.2.3

Avoiding dangers

Description
Avoid dangers. Ensure safe, problem-free operation and a maximum service life:
• Before you start using the motor, you must read these Operating Instructions.
• Always follow the safety instructions and notices in these operating instructions.
The warning notice system is explained at the beginning of this document.
You can find additional information in the relevant Configuration Manual.
1.2.4

Standard scope

Description
This documentation describes the functionality of the standard scope. This scope may differ
from the scope of the functionality of the system that is actually supplied. Please refer to the
ordering documentation only for the functionality of the supplied drive system.
Further functions may be executable in the system, which are not explained in this
documentation. However, there is no entitlement to these functions in the case of a new
delivery or service.
This documentation does not contain all detailed information on all types of the product.
Furthermore, this documentation cannot take into consideration every conceivable type of
installation, operation and service/maintenance.
The machine manufacturer must document any additions or modifications they make to the
product themselves.
Planetary gearboxes for servomotors
Operating Instructions, 09/2023, A5E50494253B AC
Introduction
1.2 About this manual
7