PRESYS
Instruments
2.1 - Calibrator Menu
To select the probe set point or electrical input functions, from the main menu,
press the CALIBRATOR button. The following screen is displayed.
At the top is shown the probe settings and values.
The centered value shows the block temperature. The
the temperature is stable, otherwise it is RED.
The set point value appears on the top. Touch in the SET bar to change it.
Pressing on the temperature unit it can be changed between °C (Celsius), °F
(Fahrenheit) or K (Kelvin).
Page 12
Fig. 05 - Calibrator Function
Fig. 06 - Calibrator Mode
TA-60NL
GREEN
color indicates that