Table of Contents
Advertisement
PRESYS
Instruments
To print the Calibration Report, press the printer icon
been previously configured in SETTINGS > SYSTEM > PRINTER CONFIG.
The Report logo can be changed for one of your own company. For this, connect
a USB cable between TA Calibrator USB Device port and a computer. Change the file
LOGO.bmp for your logo file (must be .bmp extension). We recommend an image close
to 200 x 200 pixels.
2.4 - Data-Logger
The TA Series Calibrators allow you to record series of measurements over time
to display data in chart or table format.
Select CALIBRATOR from the main menu and select the desired configuration for
Probe and Input.
Press the icon
The calibrator automatically starts the measurements and displays each
measured point on the chart.
For measurements to be saved, you must press the REC button (see Figure 32).
With this option selected, all points (measurement and time) are saved in an internal file
in TA Calibrator, which can be used to generate a table or chart.
Fig. 31 - Example of a Printed Calibration Report
and select DATA LOGGER.
TA-60NL
. The printer must have
Page 29
Advertisement
Table of Contents
