Table of Contents
Advertisement
PRESYS
Instruments
The instrument initially has no access password. This setting can be changed in
SECURITY OPTIONS.
To create a new user, press the key icon
blanks and press CREATE. It is possible to add a signature that will be used on the
calibration report.
Pay attention to the functions that each user level has access in the table below:
User Level
Calibrator
Operator
Tec
Admin
To lock the system, press the padlock icon
the TA Calibrator is turned on, it will request login and password. To unlock the system,
login as an Admin Level user and press the padlock icon on system menu again.
Adjust Cal.
Adjustment
(Adjustment) for more information.
2.6.2 - Network
In NETWORK tab you can configure the IP address for the Ethernet
communication with the computer. The IP address can be dynamically configured
(DHCP) or may have a fixed address (disable DHCP option and edit the desired
address).
By connecting the calibrator to the network you can view and print reports of the
tasks on the computer.
2.6.3 - Built-in Web Server
Connect the network cable into the Ethernet port of TA Calibrator on the side
(see Fig. 1).
To access the built-in webserver open the web browser on your computer and
enter the following address.
<calibrator_IP_address>:5000/taserver/pages/main.cgi
User: admin
Password: xvmaster
Page 32
Tasks
level
protected
by
and then users icon
Function
®
HART
Data-Logger
on system menu. The next time
password.
See
section
TA-60NL
. Fill the
Settings
5.0 - Calibration
Advertisement
Table of Contents
