Table of Contents
Advertisement
PRESYS
Instruments
2.5 - Videos
TA Series calibrators have a video player. These videos can be viewed while a
calibration is performed and are used to help operator to learn about some specific
internal procedures.
From the main menu, selecting VIDEOS a list of video categories appears. Select
the category and the desired video. Press the FULL SCREEN button
video in full screen and the WINDOW button
To add new videos on the calibrator, connect the USB cable to the computer (type
A USB) and to the TA Calibrator (Micro-B USB, see Figure 1). Open VIDEOS folder.
Copy the new video to any sub-folder (category) of the VIDEOS folder. If you prefer to
create a new category, simply create a new folder inside VIDEOS with the name of the
desired category and copy the video to this folder.
2.6 - Settings
2.6.1 - System
In the SYSTEM tab, you can set the volume of the calibrator, the touchscreen
calibration, identification of the calibrator, language, printer and security options.
Touchscreen Options
To adjust the touchscreen, press the TOUCHSCREEN OPTIONS button. Press
on the screen the places indicated by + (it is recommended to use the stylus for
touchscreen). After the calibration, press again on the screen at any point. Confirm the
calibration to return to SYSTEM Menu.
Brightness
Select the display brightness. The options are 25%, 50%, 75% and 100%.
Language Setting
Press the desired language for the system and confirm in OK button. The system
must be restarted to apply the configuration.
Calibrator Identification
In this option is possible to identify your calibrator, choosing a TAG name, Owner
name and Location.
Sound Options
Press + or - to configure a value for the system audio volume.
Printer Config.
Select the Configuration for the Printer and connect it to the USB port.
Security Options
to reduced screen.
TA-60NL
to view the
Page 31
Advertisement
Table of Contents
