Advertisement
Chapter 2 System Installation
This chapter provides a brief guidance on how to install the SUPERPRO software
and connect the programmer hardware properly.
NOTE: To avoid complications during the installation process, you must setup the
software before connecting the programming hardware (the USB device) to your
computer. That is, installation through the "Add New Hardware Wizard" of
Windows system is NOT recommended (this might lead to wrong drivers with a
different compatible device ID).
2.1 Software Setup
Select the software to setup your SUPERPRO programmer either from the CD‐
ROM or by downloading the program from the Xeltek website. Instructions for both
methods are described below.
2.1.1 Software setup from CD
1. Insert the CD into the CD-ROM drive.
2. If the setup program does not start automatically, run SETUP.EXE located in
the root directory.
3. Select the appropriate programmer model.
4. Click Setup.
NOTE: Each model has its own software and they are NOT compatible.
2.1.2 Download the software from website and setup (recommended)
You can also download the specific software for a certain model at Xeltek
website:
http://www.xeltek.com.
your programmer. Once you have saved the file to your computer, run it to setup
the software. The following procedure describes the setup process step by step.
1. Once the setup program is running, a dialog box displays to allow the user
choosing a preferred language. Select one from the drop down list and click
OK to continue
Select the icon to download the appropriate file for
Advertisement
