Advertisement
software. It includes the description of the functions and commands that is listed as
below,
•
File Menu and Tool Bar (4.1)
•
Project Menu (4.2)
•
Device Menu (4.3)
•
Option Menu (4.4)
•
Tool Bar (4.5)
•
Log History Window (4.6)
4.1 File Menu and Tool Bar
The File menu provides access to the commands of Load, Save, Recent Projects, and
Exit. Each function is described in the following sections.
4.1.1 Load File
There may be one or more data buffers in the device. If several data buffers are
displayed after you have selected the device, refer to the name and the data manual
for the meanings of the buffers. The two data types of the device are Data
(HEX/ASCII) and Fuse.
•
For most EPROM and SCM, the data type is Data (HEX/ASCII).
•
The data type for PLD device is Fuse.
After you select the device, the software automatically will identify the data buffer
type. You can review the buffer data types if you open the Edit dialog box for the
data buffer. When some file data are loaded into the data buffer, the following rules
apply:
•
With a HEX/ASCII data buffer (EPROM, MCU etc.), the system assumes that
8 bits of the data are valid.
•
With a JEDEC buffer (PLD/PAL), the system considers the lowest bit (1 bit) of
the file data valid.
Advertisement
