Advertisement
1. Module number and the ID of the programmer
2. Auto/Cancel button
3. Device name and the manufacturer information
4. Statue bar shows the success/failure of the programmer
5. Statistic information panel
6. Count down settings and information
7. Connectivity and progression of the programmer/project
8. Serial number
3.2 Programming Procedures
This section provides information on steps for common procedures to programme
devices using SUPERPRO 7500.
Before using the programmer to program a device, make sure that the programmer
is installed properly and that the computer and programmer are communicating
successfully. Make sure that you have the appropriate adapter for your SMD devices,
if applicable. Insert the chip correctly. Follow the guidelines of the standard chip
insertion markings near the pin-driver socket. However, if you select SMD or a
device that requires non-standard insertion, the system prompts you with the
appropriate chip insertion.
Advertisement
