Advertisement
protected by a password, it becomes encrypted and needs the password for
any operation.
•
Unlock. To enter the correct password enable operation on the SD card when
it is connected on-line. However, if the SD card is off-line/disconnected, the
user has to unlock it again for any other operation.
•
Erase Password. This operation actually wipes all the information that is
stored in the SD card and removes the password. After this, the SD card
needs to be format using FAT32 file system, so as to be compatible to
SUPERPRO
®
Erase Password operation.
4.3 Device Menu
4.3.1 Device selection
Refer to section 3.2.1 for the operation of device selection.
4.3.2 Device information
Click Device information will display the device information in a window (see
the figure below).
7500. One does not have to unlock the SD card to carry out the
Advertisement
