Xeltek Superpro 7500 Series User Manual page 25

3. File Type
4. Buffer Address
5. Data Size. To enter the save data size in number of bytes.
SUPERPRO 7500 User's Guide
®
3. File Type
4. Buffer Address
5. Data Size. To enter the save data size in number of bytes.
4.2 Project Menu
The project file contains all of the information and preparations before programming.
It can also be used to restore the working environment that has been saved
previously. The project file includes:
•
The current device's information, such as:
o Manufacturer
o Device type
o Pin size
o Data file name
o Current buffer data
NOTE: The buffer data may differ from the data file due to revisions.
•
All Operation Option settings
•
The content of the Auto mode
•
Software module related to the project
NOTE: The project content is related to the programmer software. If the software
has upgraded or has been re-installed to another folder, the saved project files
become ineffective
4.2.1 Load Project
Select Load Project from the Project menu to load a project file. Select the file in the
File dialog box. Following the information that is provided by the project file, user