Advertisement
3.2.1
Select the device
To open the Device Selection window, choose one of the following options:
•
Select the Device Selection icon
•
Select the Device menu and select the Select Device (Device) option.
The system then displays the Device Selection screen as shown below.
NOTE: The red device name means that such device(s) need authorization to use.
3.2.2
Load data into buffer
One can load data into the buffer by reading data either from a file or a master chip.
To read data from a file, select Load File from the File menu. The system
displays the Load File dialog box. To make sure the loaded data is correct one
can review the information in the Buffer window.
NOTE: Some Hex or S record files contain non-zero file initial address. In this
case, enter the start address in the File Address box.
To read the data from a master chip, complete the following steps:
o Insert the master chip in the socket.
o Select Read on the Device Operation window in the main screen. The
Advertisement
