Chapter 1 Overview of SUPERPRO
This section provides a brief introduction of SUPERPRO (1.1), software features (1.2),
structure of the handbook (1.3), system requirement for the installation (1.4), and
package content (1.5).
1.1 Introduction to SUPERPRO
The SUPERPRO is a menu-driven software that operates a series of cost-effective,
reliable, and high-speed universal programmers. SUPERPRO communicates
through a USB 2.0 port and operates with most IBM-compatible desktop and
notebook computers that based on Pentium. Menu-driven software interface makes
all the operations quite user-friendly.
1.2 Software feature
The USB 2.0 Series supports:
•
Windows XP, Windows Vista, and Windows 7
•
More than 43,000 types of devices, including E/EPROM, PLD, MCU, FLASH,
etc.
•
Compatible with many types of file formats, such as Binary, Intel (linear &
segmented) Hex, Motorola S, Tektronix (linear & segmented), Jed, pof, etc.
•
It supports a plug-in test (48 pins or less) to detect defective chips, improper
insertion and pins that are poorly contacted.
•
SUPERPRO has an integral full-screen buffer editorial environment with
commands such as fill, copy, move, swap, etc.
•
Electronic serial numbers are generated automatically.
1.3 Structure of this User's Guide
The content of this User's Guide is structured into three major sections,
Chapter 1 is an overview and introduction of the SUPERPRO, describing the
system requirement, installation of the hardware and software.
7500
®