Advertisement
Each view is explained in the following sections
4.4.1 General
1. For chips with 48 pins or less or for chips with an adaptor that reduces the
chip to 48 pins or less, select Insertion Test to have the programmer check the
pin contact status before programming. The test includes a check for poor
contact, wrong direction, chip insertion, and chip insertion orientation errors.
2. Select ID Check to have the programmer read the Electronic Identifier Code
from the chip to identify the manufacturer, the device type and the
programming algorithm code. If you have already selected the device, the
default for this option is checked.
3. Select Beeper On to turn the beeper on or off. The beeper makes a sound to
Advertisement
