4.3.3.1 HEX/ASCII Data Buffer
•
Locate. Enter the address of the data you wish to display and select OK to
quickly move the cursor to the desired location.
•
Fill. To fill the data in the buffer between the Start and End address. For Fuse
buffer, the data must be 0 or 1, and for Data Buffer (HEX/ASCII buffer)
•
Copy. Select Copy to open the Copy Buffer dialog box.
o Enter the start address in the Start Address field.
o Enter the end address in the End Address field.
o Select OK to copy the data between the start address and the end
address, beginning with a new address. Otherwise, select Cancel.
•
Radix. Select Radix to toggle between the HEX and DEC memory address
display.
•
Search. Select Search to search for a specified string. Select Search Next to
begin the next search for the specified string
•
Swap. Select Swap to open the Word Swap dialog box, illustrated below.
Select the Word Width option to swap high byte and low byte according to