Advertisement
3.3 Programming When Connected by Hub
SUPERPRO
7500 provides a connection hub and user can simultaneously operate
®
multiple SUPERPRO
7500 programmer by using the hub.
®
Click menu Programmer -> Module Management, and select the number of the
programmer you want to operate. Picture below shows the interface when
simultaneously operating three programmers.
Every programmer has a unique number. The programmer's first line of the LCD
display will show the number of this programmer. The module that is selected at the
time will be highlighted. The device that is going to be programmed can be different
type(s) in each of the module that is connected through the hub.
Advertisement
