Writing And Loading Setting To Non-Volatile Memory - Dalsa PC-30-02K80-R Manual

Piranha Color Camera User's Manual
To write and load the FPN coefficients, use the wfc and lfc commands,
respectively.
To write and load the PRNU coefficients, use the wpc and lfc commands,
respectively.
Before issuing the user setting commands, select the set you wish to write using the
ssn command: Sets 1 to 4 are user sets.
Current Session Settings
These are the current operating settings of your camera. To save these settings to non-
volatile memory, use the command

Writing and Loading Setting to Non-Volatile Memory

Write User Settings
Purpose:
Syntax:
Syntax Elements:
Example:
Notes:
Related Commands:
Load User Settings
Purpose:
Syntax:
Syntax Elements:
Example:
Notes:
DALSA
.
wus
Write all the current camera settings to the micro-controller's
EEPROM.
wus
wus
Before issuing this command, select the set you wish to write
with the ssn command:
Set 1-4 are user sets
The settings can be manually restored with using the lus
command.
The last saved set (excluding PC sets) of settings will be
restored automatically after the power is cycled or after the rc
command – this includes loading the LUT, FPN, and PRNU
with the saved set number
The format of the file sent to a PC is proprietary.
Load the camera's user settings from non-volatile memory and
send values to FPGA.
lus
lus
Before issuing this command, select the set you wish to load
with the SSN command
0 = Factory set
1 to 4 = User sets
5 = Selects transfer from PC
Unlike LFS, LUS only restores the settings and not the FPN,
PRNU, and LUT.
03-032-10211-03
54
9/27/2007