Dalsa PC-30-02K80-R Manual page 48

Piranha Color Camera User's Manual
Notes:
Example:
Returning Calibration Results and Errors
Returning All Pixel Coefficients
Purpose:
Syntax:
Syntax Elements:
Notes:
Example:
Returning FPN Coefficients
Purpose:
Syntax:
Syntax Elements:
Notes:
Example:
Returning PRNU Coefficients
Purpose:
Syntax:
Syntax Elements:
Notes:
Example:
DALSA
Coefficient value in a range from 0 to 61438 where:
prnu coefficient =
Before sending this command, use the scl command to select the
color or colors you want to adjust. This allows you to limit the
calibration to a single color.
The first pixel of the range must be less than the last.
spr 4001 4096 0
Returns all the current pixel coefficients in the order FPN, PRNU,
FPN, PRNU... for the range specified by x1 and x2.
dpc x1 x2
x1
Start pixel to display in a range from 1 to n, where n = 2048 or
4096 depending on the resolution.
x2
End pixel to display in a range from x1 to n, where n = 2048 or
4096 depending on the resolution.
This function returns all the current pixel coefficients in the order
FPN, PRNU, FPN, PRNU...
Limited by the scl color selection.
dpc 10 20
Returns a pixel's FPN coefficient value in DN (12 bit LSB)
gfc i
i
The pixel number to read in a range from 1 to sensor
pixel count.
Before sending this command, use the scl command to select the
color you want to adjust.
gfc 10
Returns a pixel's PRNU coefficient value in DN (12 bit LSB)
gpc i
i
The pixel number to read in a range from 1 to sensor
pixel count.
Before sending this command, use the scl command to select the
color you want to adjust.
gpc 10
03-032-10211-03
i3
1 +
4096
48
9/27/2007