Dalsa PC-30-02K80-R Manual page 83

Piranha Color Camera User's Manual
Mnemonic
enable blue correction
enable input LUT
end of line sequence
enable pixel coefficients
get command log
get camera model
get camera parameters
get camera serial
get camera version
get values
get fpn coefficient
get help
get input LUT
get line
DALSA
Syntax Parameters
ebc i
eil i
els i
epc i1 i2
gcl
gcm
gcp
gcs
gcv
get s
gfc x
gh
gil t a
gl x1 x2
03-032-10211-03
Description
order FPN, PRNU, FPN, PRNU, ...
x1 = Pixel start number
x2= Pixel end number
in a range from 1 to n. Where n =
2048 or 4096.
Enable blue correction, where:
0: Disable/Off
1: Enable/On
Enable input LUT, where:
0: Off
1: On
Sets the end-of-line sequence:
0: Off
1: On
2: LVAL (video and statistics)
Sets whether pixel coefficients are
enabled or disabled.
The first parameter sets the FPN
coefficients where i1 is:
0 = FPN coefficients disabled
1 = FPN coefficients enabled
The second parameter sets the PRNU
coefficients where i2 is:
0 = PRNU coefficients disabled
1 = PRNU coefficients enabled
Displays the last 50 commands and the
camera's response to them.
Displays the camera model number.
Displays all of the camera parameters.
Displays the camera serial number.
Displays the camera's firmware
versions.
Displays the current value of the
parameter(s) set by the command s.
Read the FPN coefficient
x = pixel number to read in a range
from 1 to n. Where n = 2048 or 4096.
Returns all of the available "get"
commands.
Display a single LUT value. Must
select a color with SCL first.
t = Tap number; 0 for all; range
modified by color selected
a = LUT address; 0 to 1023
Gets a line of video (without pixel
coefficients applied) displaying one
pixel value after another and the
minimum, maximum, and mean value
of the sampled line.
x1 = Pixel start number
x2 = Pixel end number
in a range from 1 to n. Where n =
2048 or 4096.
83
9/27/2007